National Forming, Co.
Phone: (888) 367-7553
We specialize In Aluminum Strongbacks

National Forming, Co.
Phone: (888) 367-7553
We specialize In Aluminum Strongbacks

This lightweight, high strength aluminum component provides a wall form weighing only 8.5 lb. / sq.ft. (41.5kg/m2), including plywood. Because it is so light, the Aluma Wall Form is quick and easy to assemble, simple to handle, and any size form can be provided since the system can be assembled in any length or height required, using standard length Aluma Beam® and spliced strongbacks. Using a spreader bar and lifting lugs, you can strip, fly, and re-set both sides of the wall simultaneously. The spreader bar maintains sufficient distance on re-setting to permit installation of reinforcing steel prior to closing up. Tie locations are completely flexible and can be inserted at any location throughout the length of the strongback. The Aluma Beam® can be used either horizontally with a vertical waler or vertically with a horizontal waler. This makes the Aluma wall form system completely adaptable to a variety of wall configurations such as Y-walls, shafts, and circular walls. The bolt slot in the bottom flange of the Aluma Beam® is repeated into the flanges of the strongback so that external accessories can be attached easily. These may include catwalk brackets, plumbing and wind braces, etc. There is simply no other wall system available with the versatility offered by Aluma Systems. We specialize In Used Formwork online.